PRACTICAL IDEAS FOR YOUR NEXT STEP

Moving a modular sofa: will the new arrangement work?

Check the individual modules, their connectors, the access route and the usable room space before planning a new sofa layout.

A modular corner sofa in a living room, with a floor plan and measuring tape on the table.
Illustrative image generated with artificial intelligence.

Your sofa comes apart into modules, but its current corner does not suit the new living room. Start with two separate checks: can your existing modules form the arrangement you want, and can they reach their intended position? A larger room does not settle either question. A short inventory and a simple floor plan will help you resolve them before moving day.

1. Record the modules you actually have

Note the model, number of elements and each element's function: seat, corner, chaise, armrest or separate footstool. Measure the width, depth and height of each part that will be transported, including projections that cannot be removed. Distinguish confirmed measurements from dimensions you still need to check. Record the current arrangement and any safely visible connectors without tipping a heavy module yourself. Keep your own sofa's instructions ready to discuss with the company.

2. Plan for using the sofa, not just placing it

Draw doors and their opening directions, radiators, sockets and other furniture on a simple floor plan. Add the modules at the same scale. Check routes to the door and windows, as well as space for drawers, a sofa bed or extending footrests. A layout can work for sitting but block the way when the bed opens. If you cannot yet access the property, mark provisional dimensions clearly and arrange to verify them before confirming the installation.

3. Check the whole carrying route

At both addresses, record usable doorway widths and heights, tight turns, landings and steps between the vehicle and the room. For a lift, include its door opening, cabin dimensions and stated load capacity. Ask the building management about conditions for using it during the move. Fitting through the entrance does not prove a module will turn the next corner. If clearances are tight, ask the moving company to assess the route; do not remove doors or railings yourself to force a passage.

4. Compare your preferred layout with the connections

Have the company confirm which elements can change sides and which connections are intended for the proposed arrangement. Similar-looking modules are not proof of interchangeability. Compare a confirmed layout with your preference: will functions remain accessible, are extra components needed, and who will supply them? Resolve adaptations before moving day. If compatibility is uncertain, plan a verified temporary arrangement instead of improvising new holes or fixings when the sofa arrives.

5. Keep accessories linked to the right elements

Give each module a simple reference and use it for the corresponding cushions, removed feet and bags of fittings. Put labels on suitable packaging rather than delicate upholstery. Empty storage compartments and list their contents as separate packages. Agree who will separate, pack and reconnect the modules. Heavy pieces or unfamiliar mechanisms need professional assessment. Suva's prevention guidance recommends planning the handling of heavy loads and using suitable transport aids; an improvised lifting attempt is no substitute for that preparation.

Suva: preventing injury when handling heavy loads

6. Check the result before using it

On arrival, have the module positions checked against the plan before final connection. Review together whether all agreed parts have been fitted, accessories are present and functions can be used according to the instructions. Record a missing component or visible damage specifically. Do not replace an absent connector with an arbitrary fitting. Keep an uncertain mechanism out of use until a competent person has checked it.

7. Write a useful moving request

In your text request through REQAVIA, describe both addresses, floors, access, date, sofa model, module measurements and desired arrangement. Specify dismantling and reassembly, including anything that still needs assessment. Share photographs and the floor plan directly and privately with the company during coordination. REQAVIA acts as an intermediary; you agree the scope, price and execution directly with the company. Request an offer that covers the actual transport and the assembly you need.

Back to the journal